Recently, some of our readers reported to us that they encountered a sqstat error.
I’m having a problem processing real-time proxy reports in Lightsquid.
This gives me an error:
SqStat Error (1): Failed to retrieve critical information. Server responded: HTTP/1.0 403 Forbidden [web config set to http]
Error with error (1): get data. Server response: HTTP/1.0 301 moved permanently [from network to HTTPS fixed configuration]
Help and suggestions are welcome. It works great and I changed the individual web config from http to https. This tool is broken. Of course
not how to solve this problem.
I’m having a problem with Lightquid’s live proxy check.
This gives me the following error:
SqStat Error (1): Failed to get data. Server responded: HTTP/1.0 403 Forbidden [web config setup]Updated to http]
Error with error (1): get data. Server replied: HTTP/1.0 301 moved permanently [fixed web config to HTTPS]Sure
not how to solve this problem.
Even though I’ve been facing the same issue since work day, I installed pfsense and was wondering if anyone could track down some issue and find a possible fix..< /p>
Thank you in advance
You have sqstat error with HTTP or with HTTPS Component=”post”>
Sorry for the late reply…
The email notification didn’t arrive…
In both cases, the web configuration checks for HTTP and HTTPS…
I noticed it was running a few hours ago… right now when I type this it is not active and I get the following error: Error (1): Cannot include dates. Server responded: HTTP/1.0 403 Forbidden.Webconfig
Currently time used by HTTP
Even though this topic has been open for a long time, just wanted to let you know that in my case there was a reported issue with SquidGuard and it definitely didn’t work properly.
Even though it’s been a long time since this thread was created, just so you know that in my case SquidGuard was our own problem, the report didn’t actually work.
Pfsense 2.0.3 is installed with Lightsquid. A
Nobody solves this problem, right? :-[
This might be funny, but I have the same problem. Well, my family and I are trying something on Write there, and here, too, everything is corrected. sqstat show to display statistics in real time. that I should run Service->Proxy-Server->General, “Disable Proxy Bypass for Leave Assignment in Private Address Space (RFC 1918)” and click Save. However, when I try to open Status->Proxy Report->Proxy Status, I immediately see a working page, please fix it. Then I go back to Tools->Proxy Server->General, check “Private Address Space Proxy Bypass (RFC 1918) Target” again, and just like that, restore the proxy system to the latest configuration. And I look again at Status ->Proxy Report->Proxy Status, still working.
Well, that sounds strange, but let’s try it. Many chances. 🙂
I have the same problem with sqstat. I have tested with HTTP and HTTPS. Reinstalled the package, reinstalled pfsense, etc. I’m lost. Some designers have an idea to solve this problem. I also went through Found Google, some people say there are some sources.controls, but they don’t work either.
Built 3 releases Friday 12-15 10:27:15 April EDT 2013
Bandwidth (2.0.1_5 packages version 0.1)
Control panel widget: snort (0.3.4)
lightquid (package 1.8.2 v.2.32)
sniff (18.104.22.168 pkg v. 2.5.9 )
Squid (package 2.7.9 v.4.3.3)
squid3 (3.1.20 package 2.0.6)
Squid (package 1.4_4 v.1.9.5)
Thanks for all components=”post”> James
If there is someone else, this should work:
The same situation was at https://forum.pfsense.org/index.php?topic=50366.0
AND NOT just the “https://www.altsec.com/2013/10/pfsense-http1-0-403-forbidden-proxy-report/” recipe you can.
So you can also get the same error on the following failures:
If your SquidGuard proxy filter blocks web access specifically for “Squid Proxy: Live Statistics”At some time (sqstat)”, see an example by randomly viewing “SquidGuard Proxy Filter: Shared Access Control List (Shared ACL)”. set “default access” to [everyone] who “denies”!
If your Squid proxy (version >= 3) shows NOTHING in the Realtime tabs, this can be achieved if your settings for that Squid proxy were INCORRECT and Squid cannot serve the Internet. prompt clients (and do not write anything – these are EMPTY logs). For example, this can happen when filling in TEXT aliases using IP address fields.
I’m having a problem with realtime proxies reporting Lightsquid.Error
Sqstat(1) failed: Failed to get data. Server responded: HTTP/1.0 403 Forbidden [web config located at http]
Error at (1): Unable to get data. Server response: HTTP/1.0 301 Permanently moving [Web config set to HTTPS]
An offer of help is welcome. It worked fine while I changed my web config from http to https it broke.
Are you having problems?Issues with real-time proxies reporting to Lightsquid.Get the software that will fix your PC by clicking here.
Étapes Pour Se Débarrasser Du Problème D’erreur Sqstat Associé
Sqstat 오류 문제를 해결하는 단계
Pasos Para Deshacerse Del Problema De Error De Sqstat
Kroki, Jak Pozbyć Się Problemu Związanego Z Błędem Sqstat
Etapas Para Se Livrar Do Problema De Erro Do Sqstat
Stappen Om De Meest Voorkomende Problemen Met Sqstat-fout Te Verwijderen
Passaggi Che Possono Eliminare Il Problema Dell’errore Sqstat
Шаги по устранению проблемы с ошибкой Sqstat
Schritte, Wenn Sie Sqstat Loswerden Müssen, Machen Einen Fehler Problem
Steg För Att Bli Av Med Sqstat-felproblem